Clear Rmon Matrix; Show Rmon Channel - Enterasys Matrix DFE-Gold Series Configuration Manual

clear rmon matrix

Mode
Switch command, Read‐Write.
Example
This example shows how to enable RMON matrix entry 1:
Matrix(rw)->set rmon matrix status 1 enable
clear rmon matrix
Use this command to delete an RMON matrix entry.
Syntax
clear rmon matrix index
Parameters
index
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete RMON matrix entry 1:
Matrix(rw)->clear rmon matrix 1

show rmon channel

Use this command to display RMON channel entries for one or more ports.
Syntax
show rmon channel [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, information about all channels will be displayed.
Mode
Switch command, Read‐Only.
Specifies the index number of the entry to be cleared.
(Optional) Displays RMON channel entries for a specific port(s).
Enterasys Matrix DFE-Gold Series Configuration Guide 11-35
Configuring RMON