Set Logging Here; Clear Logging Here - Enterasys Matrix DFE-Gold Series Configuration Manual

set logging here

set logging here
Use this command to enable or disable the current CLI session as a Syslog destination.
Syntax
set logging here {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
The effect of this command will be temporary if the current CLI session is using Telnet or SSH, but
persistent on the console.
Example
This command shows how to enable the display of logging messages to the current CLI session:
Matrix(rw)->set logging here enable

clear logging here

Use this command to clear the logging state for the current CLI session.
Syntax
clear logging here
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This command shows how to clear the logging state for the current CLI session:
Matrix(rw)->clear logging here
Enables or disables display of logging messages for the current CLI
session.
Enterasys Matrix DFE-Gold Series Configuration Guide 10-13
Configuring System Logging