Set Netflow Cache; Clear Netflow Cache - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring NetFlow
Export Interval:
Number of Entries:
Inactive Timer:
Template Refresh-rate: 20 (packets)
Template Timeout:
Enabled Ports:
-----------------
ge.1.11,23

set netflow cache

Use this command to enable (create) or disable (free up) a NetFlow cache on each DFE blade in the
Enterasys Matrix system.
Syntax
set netflow cache {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
A NetFlow cache maintains NetFlow information for all active flows. By default, NetFlow caches
are not created.
Example
This example shows how to enable, or create, a NetFlow cache on each DFE blade in the system:
Matrix(rw)->set netflow cache enable

clear netflow cache

Use this command to remove, or free up, the NetFlow caches on each DFE blade in the Enterasys
Matrix system.
Syntax
clear netflow cache
Parameters
None.
15-4 NetFlow Configuration
30 (min)
196607
40 (sec)
30 (min)
Enable or disable the NetFlow cache.
set netflow cache