Enterasys Matrix DFE-Gold Series Configuration Manual page 414

Assigning Classification Rules to Policy Profiles
ipsource
iptos
llcDsapSsap
macdest
macsource
port
tcpdestport
tcpsourceport
udpdestport
udpsourceport
data
mask mask
port‐string port‐string
rule‐status active |
not‐in‐service | not‐
ready
storage‐type non‐
volatile | volatile
vlan vlan
drop | forward
dynamic‐pid dynamic‐
pid
cos cos
admin‐pid admin‐pid Displays rules associated with a specific administrative policy profile
‐verbose
Defaults
• If port‐string, rule status, storage type, Syslog state, trap, and usage‐list are not specified, all
rules related to other specifications will be displayed.
• If verbose is not specified, summary information will be displayed.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display policy classification information for Ethernet type 2 rules
Matrix(rw)->show policy rule ether:
8-8 Policy Classification Configuration
Displays IP source address rules.
Displays Type of Service rules.
Displays 802.3 DSAP/SSAP rules.
Displays MAC destination address rules.
Displays MAC source address rules.
Displays port related rules.
Displays TCP destination port rules.
Displays TCP source port rules.
Displays UDP destination port rules.
Displays UDP source port rules.
(Not required for ipfrag classification.) Displays rules for a predefined
classifier. This value is dependent on the classification type entered.
Refer to Table 8‐3 for valid values for each classification type.
(Optional) Displays rules for a specific data mask. Refer to Table
valid values for each classification type and data value.
(Optional) Displays rules related to a specific ingress port.
(Optional) Displays rules related to a specific rules status.
(Optional) Displays rules configured for either non‐volatile or volatile
storage.
(Optional) Displays rules for a specific VLAN ID.
Displays rules based on whether matching packets specified by the
vlan parameter will be dropped or forwarded.
Displays rules associated with a specific dynamic policy profile index
ID.
(Optional) Displays rules for a Class‐of‐Service value.
index ID.
(Optional) Displays detailed information.
show policy rule
8‐3 for