Show Spantree Portenable; Set Spantree Portenable - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Spanning Tree Port Parameters

show spantree portenable

Use this command to display the port status on one or more Spanning Tree ports.
Syntax
show spantree portenable [port port-string]
Parameters
port port‐string
Defaults
If port‐string is not specified, status will be displayed for all ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display status for port fe.1.12:
Matrix(rw)->show spantree portenable port fe.1.12
Port fe.1.12

set spantree portenable

Use this command to set the port status on one or more Spanning Tree ports.
Syntax
set spantree portenable port-string {enable | disable}
Parameters
port‐string
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable Spanning Tree port fe.1.12:
Matrix(rw)->set spantree portenable fe.1.12 enable
6-50 Spanning Tree Configuration
(Optional) Displays status for specific port(s). For a detailed description
of possible port‐string values, refer to "Port String Syntax Used in the
CLI" on page 4‐2.
has a Port Status of Enabled
Specifies the port(s) to enable or disable. For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 4‐2.
Enables or disables the Spanning Tree port.
show spantree portenable