Commands; Configuring Tacacs; Show Tacacs - Enterasys Matrix DFE-Gold Series Configuration Manual

show tacacs

Configuring TACACS+

Purpose
To perform the following:
• Review the TACACS+ client and server configurations on the device.
• Enable or disable the TACACS+ client.
• Set local and remote login options.
• Set server parameters, including IP address, timeout period, server port, and secret.
• Reset TACACS+ client and server settings to default values.

Commands

For information about...
show tacacs
set tacacs
show tacacs server
set tacacs server
clear tacacs server
show tacacs session
set tacacs session
clear tacacs session
show tacacs command
set tacacs command
show tacacs singleconnect
set tacacs singleconnect
show tacacs
Use this command to display the current TACACS+ configuration information and status.
Syntax
show tacacs [state]
Parameters
state
Defaults
If state is not specified, all TACACS+ configuration information will be displayed.
(Optional) Displays only the TACACS+ client status.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-63
Configuring TACACS+
Refer to page...
25-63
25-65
25-65
25-66
25-67
25-67
25-68
25-69
25-70
25-71
25-71
25-72