Show Rmon Alarm - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring RMON
Parameters
index‐list
to‐defaults
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete RMON history entry 1:
Matrix(rw)->clear rmon history 1

show rmon alarm

Use this command to display RMON alarm entries.
Syntax
show rmon alarm [index]
Parameters
index
Defaults
If index is not specified, information about all RMON alarm entries will be displayed.
Mode
Switch command, Read‐Only.
Usage
The RMON alarm group periodically takes statistical samples from RMON variables and
compares them with previously configured thresholds. If the monitored variable crosses a
threshold an RMON event is generated.
Example
This example shows how to display RMON alarm entry 3:
Matrix(rw)->show rmon alarm 3
Index 3
---------------------
Owner
Status
Variable
11-20 Network Monitoring Configuration
Specifies one or more history entries to be deleted, causing them to
disappear from any future RMON queries.
Resets all history entries to default values. This will cause entries to
reappear in RMON queries.
(Optional) Displays RMON alarm entries for a specific entry index ID.
= Manager
= valid
= 1.3.6.1.4.1.5624.1.2.29.1.2.1.0
show rmon alarm