Assigning Classification Rules To Policy Profiles; Purpose; Commands; Show Policy Rule - Enterasys Matrix DFE-Gold Series Configuration Manual

show policy rule

Assigning Classification Rules to Policy Profiles

Purpose

To review, assign and unassign classification and admin rules. Classification rules map policy
profiles to protocol‐based frame filtering policies configured for a particular VLAN or Class of
Service (CoS). Admin rules assign policy profiles to incoming traffic.

Commands

For information about...
show policy rule
show policy capability
set policy classify
set policy rule
clear policy rule
clear policy all-rules
set policy port
show policy allowed-type
set policy allowed-type
clear policy allowed-type
clear policy port-hit
show policy rule
Use this command to display policy classification and admin rule information.
Syntax
show policy rule [attribute] | [all] | [admin-profile] | [profile-index]
| ipdest | ipfrag | ipproto | ipsource | iptos | llcDsapSsap | macdest | macsource
| port | tcpdestport| tcpsourceport| udpdestport | udpsourceport [data] [mask
mask]
ready}] [storage-type {non-volatile | volatile}] [vlan vlan] | [drop | forward]
[dynamic-pid dynamic-pid] [cos cos] [admin-pid admin-pid] [-verbose]
Parameters
attribute
all | admin‐profile |
profile‐index
ether
ipdest
ipfrag
ipproto
[port-string port-string] [rule-status {active | not-in-service | not-
Displays the attributes of the specified rules.
Displays all admin and classification rules, rules for the admin profile,
or for a specific
Displays Ethernet type II rules.
Displays IP destination address rules.
Displays IP fragmentation rules.
Displays IP protocol field in IP packet rules.
Assigning Classification Rules to Policy Profiles
profile-index
number. Valid index values are 1 ‐ 1023.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-7
Refer to page...
8-7
8-10
8-11
8-13
8-15
8-16
8-17
8-17
8-18
8-19
8-19
[ether