Set Macauthentication Portinitialize; Set Macauthentication Macinitialize - Enterasys Matrix DFE-Gold Series Configuration Manual

set macauthentication portinitialize

Defaults
If port‐string is not specified the number of allowed authentication sessions will be cleared on all
ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the number of allowed MAC authentication sessions on ge.2.1:
Matrix(rw)->clear macauthentication authallocated ge.2.1
set macauthentication portinitialize
Use this command to force one or more MAC authentication ports to re‐initialize and remove any
currently active sessions on those ports.
Syntax
set macauthentication portinitialize port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to force ge.2.1 through 5 to initialize:
Matrix(rw)->set macauthentication portinitialize ge.2.1-5

set macauthentication macinitialize

Use this command to force a current MAC authentication session to re‐initialize and remove the
session.
Syntax
set macauthentication macinitialize mac_addr
Parameters
mac_addr
Specifies the MAC authentication port(s) to re‐initialize. For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Specifies the MAC address of the session to re‐initialize.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-33
Configuring MAC Authentication