Set Console Flowcontrol; Clear Console Flowcontrol - Enterasys Matrix DFE-Gold Series Configuration Manual

set console flowcontrol

Defaults
If port‐string is not specified, the flow control setting for all console ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the flow control setting for console port com.1.1:
Matrix(rw)->show console flowcontrol com.1.1
Port
------------
com.1.1
set console flowcontrol
Use this command to set the type of flow control for one or more console ports.
Syntax
set console flowcontrol {none | ctsrts | dsrdtr} [port-string]
Parameters
none
ctsrts
dsrdtr
port‐string
Defaults
If port‐string is not specified, flow control will be set for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable DSR/DTR flow control for console port com.1.1:
Matrix(rw)->set console flowcontrol dsrdtr com.1.1

clear console flowcontrol

Use this command to clear the type of flow control for one or more console ports.
Syntax
clear console flowcontrol [port-string]
Flow
--------
ctsrts
Disables all hardware flow control.
Enables CTS/RTS (Clear to Send/Request to Send) hardware flow
control.
Enables DSR/DTR (Data Set Ready/Data Terminal Ready) hardware
flow control.
(Optional) Sets flow control for specific console port(s).
Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-7