Cache; Faildetect Type - Enterasys Matrix DFE-Gold Series Configuration Manual

cache

cache
Use this command to create a cache server based upon the supplied IP address.
Syntax
cache ip-address
Parameters
ip‐address
Defaults
None.
Mode
Router command, Server Farm Configuration mode: Matrix(rw)‐>Router(config‐twcb‐wcsfarm)#.
Usage
The firmware supports 128 cache servers.
Executing this command enters cache server configuration command mode.
Example
This example configures IP address 186.89.10.51 as a cache server on the s1Server server farm:
Matrix(rw)->Router(config)#ip twcb wcserverfarm s1Server
Matrix(rw)->Router(config-twcb-wcsfarm)#cache 186.89.10.51
Matrix(rw)->Router(config-twcb-cache)#

faildetect type

Use this command to specify the TWCB cache server up or down status detection method.
Syntax
faildetect type [ping | app | both]
Parameters
ping
app
both
Defaults
If no parameter is specified, the Ping method is used.
Specifies the IP address of the cache server to be created.
(Optional) Specifies the ping method for detection of TWCB cache
server up or down status.
(Optional) Specifies the application method for detection of TWCB
cache server up or down status.
(Optional) Specifies that both ping and app detection types should be
used for the detection of TWCB cache server up or down status.
Enterasys Matrix DFE-Gold Series Configuration Guide 23-5
Understanding Transparent Web Cache Balancing (TWCB)