Set Smon Vlan; Clear Smon Vlan - Enterasys Matrix DFE-Gold Series Configuration Manual

set smon vlan

Status
--------------------
VLAN 1
Total
Overflow
NonUnicast
NonUnicast Overflow
set smon vlan
Use this command to create, start, or stop SNMP VLAN‐related statistics counting.
Syntax
set smon vlan {create | enable | disable} port-string [owner]
Parameters
create | enable |
disable
port‐string
owner
Defaults
If owner is not specified, none will be applied.
Mode
Switch command, Read‐Write.
Example
This example shows how set the device to gather SMON VLAN‐related statistics from 1‐Gigabit
Ethernet port 14 in module 3:
Matrix(rw)->set smon vlan ge.3.14

clear smon vlan

Use this command to delete an SMON VLAN statistics counting configuration.
Syntax
clear smon vlan [port-string]
= enabled
Packets
8011072
0
0
0
Creates, enables, or disables SMON VLAN statistics counting. Create
automatically enables (starts) counters.
Specifies one or more source ports on which to collect statistics. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
(Optional) Specifies an administratively assigned name of the owner of
this entity.
Octets
2070785503
0
0
0
Enterasys Matrix DFE-Gold Series Configuration Guide 11-11
Configuring SMON