Cls (Clear Screen); Exit | Quit; Pausing, Clearing And Closing The Cli; Purpose - Enterasys Matrix DFE-Gold Series Configuration Manual

Pausing, Clearing and Closing the CLI

Pausing, Clearing and Closing the CLI

Purpose

To clear the CLI screen or to close your CLI session.

Commands

The commands used to clear and close the CLI session are listed below and described in the
associated sections as shown.
For information about...

cls (clear screen)

exit | quit

cls (clear screen)
Use this command to clear the screen for the current CLI session.
Syntax
cls
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to clear the CLI screen:
Matrix(rw)->cls
exit | quit
Use either of these commands to leave a CLI session.
Syntax
exit
quit
Parameters
None.
2-92 Startup and General Configuration
cls (clear screen)
Refer to page...
2-92
2-92