Dhcp Command Modes; Dhcp Server Supported Options - Enterasys Matrix DFE-Gold Series Configuration Manual

DHCP Overview
Table 20-1 DHCP Server Supported Options
DHCP Option
Renewal Time Value
Rebinding Time Value
NIS+ Domain
NIS+ Servers
Mobile IP Home Agent
SMTP Server
POP3 Server
NNTP Server
Default WWW Server
Default Finger Server
Default IRC Server
StreetTalk Server
StreetTalk Directory Assistance Server
Relay Agent Information
Subnet Selection

DHCP Command Modes

Except for clear and show commands, most DHCP configuration commands can be executed in
most of the DHCP command modes shown in Table
command being executed in one of the appropriate DHCP configuration modes.
.
Table 20-2 DHCP Command Modes
Mode
IP Local Pool
Configuration
Mode
DHCP Pool
Configuration
Mode
20-4 DHCP Configuration
Usage Access Method
Configure a local Type ip local pool
address pool as a and the local pool
DHCP subnet. name from Global
Configuration Mode.
Configure a DHCP Type ip dhcp pool
server address pool. and the address pool
name from Global
Configuration Mode.
20‐2. CLI examples in this section will show a
Resulting Prompt
Matrix>Router
(ip-local-pool)#
Matrix>Router
(config-dhcp-pool)#
Option Code
58
59
64
65
68
69
70
71
72
73
74
75
76
82
Defined in RFC-3046
118
Defined in RFC3011