Enterasys Matrix DFE-Gold Series Configuration Manual page 46

Startup and General Configuration Summary
Table 2-1 Default Device Settings for Basic Switch Operation (continued)
Device Feature
Spanning Tree edge port
delay
Spanning Tree forward
delay
Spanning Tree hello
interval
Spanning Tree ID (SID)
Spanning Tree legacy path
cost
Spanning Tree maximum
aging time
Spanning Tree point-to-
point
Spanning Tree port priority
Spanning Tree priority
Spanning Tree topology
change trap suppression
Spanning Tree transmit
hold count
Spanning Tree version
Spanning Tree Loop
Protect
Spanning Tree Loop
Protect event threshold
Spanning Tree Loop
Protect event window
Spanning Tree Loop
Protect traps
Spanning Tree disputed
BPDU threshold
SSH
System baud rate
System contact
System location
System name
Terminal
Timeout
User names
VLAN dynamic egress
2-4 Startup and General Configuration
Default Setting
Enabled.
Set to 15 seconds.
Set to 2 seconds.
Set to 0.
Disabled.
Set to 20 seconds.
Set to auto for all Spanning Tree ports.
All ports with bridge priority are set to 128 (medium priority).
Bridge priority is set to 32768.
Enabled.
Set to 3.
Set to mstp (Multiple Spanning Tree Protocol).
Disabled per port and per SID.
3 events.
180 seconds.
Disabled.
Set to 0, meaning no traps are sent.
Disabled.
Set to 9600 baud.
Set to empty string.
Set to empty string.
Set to empty string.
CLI display set to 80 columns and 24 rows.
Set to 15 minutes.
Login accounts set to ro for Read-Only access; rw for Read-Write access;
and admin for Super User access.
Disabled on all VLANs.