Clear Inlinepower Mode; Set Inlinepower Available - Enterasys Matrix DFE-Gold Series Configuration Manual

clear inlinepower mode

Parameters
auto
manual
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the chassis power allocation mode to manual:
Matrix(rw)->set inlinepower mode manual
clear inlinepower mode
Use this command to reset chassis power allocation to the default mode of auto.
Syntax
clear inlinepower mode
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the chassis power allocation mode to auto:
Matrix(rw)->clear inlinepower mode

set inlinepower available

Use this command to set the percentage of total power available that a chassis can withdraw from
the total power detected.
Syntax
set inlinepower available max-percentage
Assigns automatic mode to chassis power allocation.
Assigns manual mode to chassis power allocation. This setting allows
the values configured with the set inlinepower assigned command
("set inlinepower assigned" on page 2‐66) to be applied to PoE
modules.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-63
Configuring Power over Ethernet (PoE)