Set Spantree Msti; Clear Spantree Msti - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Spanning Tree Bridge Parameters

set spantree msti

Use this command to create or delete a Multiple Spanning Tree instance.
Syntax
set spantree msti sid sid {create | delete}
Parameters
sid sid
create | delete
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to create MST instance 2:
Matrix(rw)->set spantree msti sid 2 create

clear spantree msti

Use this command to delete one or more Multiple Spanning Tree instances.
Syntax
clear spantree msti sid
Parameters
sid
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete MST instance 1:
Matrix(rw)->clear spantree msti 1
6-14 Spanning Tree Configuration
Sets the Multiple Spanning Tree ID. Valid values are 1 ‐ 4094.
Note: Matrix Series devices will support up to 32 instances with an additional
128 MB of memory installed.
Creates or deletes an MST instance.
Specifies a multiple Spanning Tree ID to be deleted.
set spantree msti