Clear Spantree Portenable; Show Spantree Portadmin - Enterasys Matrix DFE-Gold Series Configuration Manual

clear spantree portenable

clear spantree portenable
Use this command to reset the default value for one or more Spanning Tree ports to enabled.
Syntax
clear spantree portenable port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the default Spanning Tree port status value to enabled on fe.1.12:
Matrix(rw)->clear spantree portenable fe.1.12

show spantree portadmin

Use this command to display the status of the Spanning Tree algorithm on one or more ports.
Syntax
show spantree portadmin [port port-string]
Parameters
port port‐string
Defaults
If port‐string is not specified, status will be displayed for all ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display port admin status for fe.1.7:
Matrix(rw)->show spantree portadmin port fe.1.7
Port fe.1.7 has portadmin set to enable
Specifies port(s) to reset. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 4‐2.
(Optional) Displays status for specific port(s). For a detailed description
of possible port‐string values, refer to "Port String Syntax Used in the
CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 6-51
Configuring Spanning Tree Port Parameters