Show Spantree Version; Set Spantree Version - Enterasys Matrix DFE-Gold Series Configuration Manual

show spantree version

show spantree version
Use this command to display the current version of the Spanning Tree protocol running on the
device.
Syntax
show spantree version
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display Spanning Tree version information for the device:
Matrix(rw)->show spantree version
Force Version is mstp

set spantree version

Use this command to set the version of the Spanning Tree protocol to MSTP (Multiple Spanning
Tree Protocol), RSTP (Rapid Spanning Tree Protocol) or to STP 802.1D‐compatible.
Syntax
set spantree version {mstp | stpcompatible | rstp}
Parameters
mstp
stpcompatible
rstp
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
In most networks, Spanning Tree version should not be changed from its default setting of mstp
(Multiple Spanning Tree Protocol) mode. MSTP mode is fully compatible and interoperable with
legacy STP 802.1D and Rapid Spanning Tree (RSTP) bridges. Setting the version to stpcompatible
Sets the version to STP 802.1s‐compatible.
Sets the version to STP 802.1D‐compatible.
Sets the version to 802.1w‐compatible.
Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-9