Set Maclock Firstarrival; Set Maclock Move - Enterasys Matrix DFE-Gold Series Configuration Manual

set maclock firstarrival

Example
This example shows how to create a MAC locking association between MAC address 00‐a0‐c9‐0d‐
32‐11 and port fe.2.3:
Matrix(rw)->set maclock 00-a0-c9-0d-32-11 fe.2.3 create
set maclock firstarrival
Use this command to restrict MAC locking on a port to a maximum number of end station
addresses first connected to that port.
Syntax
set maclock firstarrival port_string value
Parameters
port_string
value
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to restrict MAC locking to 6 MAC addresses on fe.2.3:
Matrix(rw)->set maclock firstarrival fe.2.3 6

set maclock move

Use this command to move all current first arrival MACs to static entries.
Syntax
set maclock move port-string
Parameters
port‐string
Defaults
None.
Specifies the port on which to limit MAC locking. For a detailed
description of possible port_string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Specifies the number of first arrival end station MAC addresses to be
allowed connections to the port. Valid values are 0 to 600.
Specifies the port where all current first arrival MACs will be moved to
static entries. For a detailed description of possible port_string values,
refer to "Port String Syntax Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 24-7
Configuring MAC Locking