Clear Rmon Filter - Enterasys Matrix DFE-Gold Series Configuration Manual

clear rmon filter

smask smask
snotmask snotmask
data data
dmask dmask
dnotmask dnotmask
owner
Defaults
• If owner is not specified, it will be set to monitor.
• If no other options are specified, none (0) will be applied.
Mode
Switch command, Read‐Write.
Example
This example shows how to create RMON filter 1 and apply it to channel 9:
Matrix(rw)->set rmon filter 1 10 offset 30 data 0a154305 dmask ffffffff
clear rmon filter
Use this command to clear an RMON filter entry.
Syntax
clear rmon filter {index index | channel channel}
Parameters
index
index
channel
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear RMON filter entry 1:
Matrix(rw)->clear rmon filter index 1
(Optional) Specifies the mask applied to status to indicate which bits
are significant.
(Optional) Specifies the inversion mask that indicates which bits should
be set or not set
(Optional) Specifies the data to be matched.
(Optional) Specifies the mask applied to data to indicate which bits are
significant.
(Optional) Specifies the inversion mask that indicates which bits should
be set or not set.
(Optional) Specifies the name of the entity that configured this entry.
| channel Clears a specific filter entry, or all entries belonging to a specific
channel.
Enterasys Matrix DFE-Gold Series Configuration Guide 11-39
Configuring RMON