Clear Cos Port-Config Irl; Set Cos Port-Config Txq - Enterasys Matrix DFE-Gold Series Configuration Manual

clear cos port-config irl

Mode
Switch command, Read‐Write.
Example
This example shows how to create a CoS inbound rate limiting port group entry named "test irl"
with a port group ID of 1 and a port type ID of 1:
Matrix(rw)->set cos port-config irl 1.1 name test irl
clear cos port-config irl
Use this command to clear a non‐default Class of Service inbound rate limiting port group
configuration:
Syntax
clear cos port-config irl all | group-type-index {[entry] | [name] | [ports]}
Parameters
all | group‐type‐index
entry | name
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete the CoS inbound rate limiting port group entry 1.1:
Matrix(rw)->clear cos port-config irl 1.1 entry

set cos port-config txq

Use this command to set the Class of Service transmit queue port group configuration:
Syntax
set cos port-config txq group-type-index [name name] [ports port-list] [append] |
[clear]
Clears all inbound rate limiting non‐default configurations, or those for
a specific user‐defined port group index.
|
ports Deletes a specific entry or name, or clears the ports assigned to this
inbound rate limiting configuration.
Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-29