Show Lldp Port Location-Info; Show Lldp Port Local-Info - Enterasys Matrix DFE-Gold Series Configuration Manual

Link Layer Discovery Protocol and LLDP-MED
-------
ge.1.1
ge.1.2
ge.1.3

show lldp port location-info

Use this command to display configured location information for one or more ports.
Syntax
show lldp port location-info [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, port location configuration information will be displayed for all
ports.
Mode
Switch command, Read‐Only.
Usage
Ports are configured with a location value using the set lldp port location‐info command.
Example
This example shows how to display port location information for three ports.
Matrix(ro)->show lldp port location-info ge.1.1-3
Ports
--------
ge.1.1
ge.1.2
ge.1.3

show lldp port local-info

Use this command to display the local system information stored for one or more ports.
Syntax
show lldp port local-info [port-string]
3-20 Discovery Protocols Configuration
Desc Name Desc Cap Addr Id
---- ---- ---- --- ---- ---- ---- --- --- ---- ----
* * * * *
* * * * *
* * * * *
(Optional) Displays port location information for one or a range of
ports.
Type Location
------------- -------------------------
ELIN 1234567890
ELIN 1234567890
ELIN 1234567890
Id PHY Aggr Frame Cap Pol Loc PoE
* slg * *
* slg * *
* slg * *
show lldp port location-info
--- --- --- ---
* * * *
* * * *
* * * *