Clear Arp-Cache - Enterasys Matrix DFE-Gold Series Configuration Manual

Reviewing and Configuring the ARP Table
Parameters
seconds
Defaults
None.
Mode
Router command, Global configuration: Matrix>Router(config)#
Usage
The device can support up to 2000 outstanding unresolved ARP entries.
The "no" form of this command restores the default value of 14,400 seconds
Example
This example shows how to set the ARP timeout to 7200 seconds:
Matrix>Router(config)#arp timeout 7200

clear arp-cache

Use this command to delete all nonstatic (dynamic) entries from the ARP table.
Syntax
clear arp-cache
Parameters
None.
Defaults
None.
Mode
Privileged EXEC: Matrix>Router#
Example
This example shows how to delete all dynamic entries from the ARP table:
Matrix>Router#clear arp-cache
16-18 IP Configuration
Specifies the time in seconds that an entry remains in the ARP cache.
Valid values are 0 ‐ 65535. A value of 0 specifies that ARP entries will
never be aged out.
clear arp-cache