Set Igmp Enable; Set Igmp Disable - Enterasys Matrix DFE-Gold Series Configuration Manual

set igmp enable

Mode
Switch command, Read‐Only.
Example
This example shows how to display the IGMP status for VLAN 104:
Matrix(rw)->show igmp enable 104
IGMP Default State for vlan 104 is Disabled
set igmp enable
Use this command to enable IGMP on one or more VLANs.
Syntax
set igmp enable vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable IGMP on VLAN 104:
Matrix(rw)->set igmp enable 104

set igmp disable

Use this command to disable IGMP on one or more VLANs.
Syntax
set igmp enable vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, Read‐Write.
Specifies the VLAN(s) on which to enable IGMP.
Specifies the VLAN(s) on which to enable IGMP.
Enterasys Matrix DFE-Gold Series Configuration Guide 9-3
Enabling / Disabling IGMP