Configuring IGMP
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the IGMP query state for VLAN 1:
Matrix(rw)->show igmp query 1
IGMP querying on vlan 1 is Disabled
set igmp query-enable
Use this command to enable IGMP querying on one or more VLANs.
Syntax
set igmp query-enable vlan-list
Parameters
vlan‐list
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable IGMP querying on VLAN 104:
Matrix(rw)->set igmp query-enable 104
set igmp query-disable
Use this command to disable IGMP querying on one or more VLANs.
Syntax
set igmp query-disable vlan-list
Parameters
vlan‐list
Defaults
None.
9-6 IGMP Configuration
Specifies the VLAN(s) on which to enable IGMP querying.
Specifies the VLAN(s) on which to disable IGMP querying.
set igmp query-enable