Set Pwa; Set Pwa Hostname - Enterasys Matrix DFE-Gold Series Configuration Manual

set pwa

set pwa
Use this command to enable or disable port web authentication.
Syntax
set pwa {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
Port Web Authentication cannot be enabled if either MAC authentication or EAPOL (802.1X) is
enabled. For information on disabling 802.1X, refer to "set dot1x" on page 25‐7. For information
on disabling MAC authentication, refer to "set macauthentication" on page 25‐29.
Example
This example shows how to enable port web authentication:
Matrix(rw)->set pwa enable

set pwa hostname

Use this command to set a port web authentication host name.
Syntax
set pwa hostname name
Parameters
name
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
This is a URL for accessing the PWA login page.
Enables or disables port web authentication.
Specifies a name for accessing the PWA login page.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-15
Configuring Port Web Authentication (PWA)