Persistence Level - Enterasys Matrix DFE-Gold Series Configuration Manual

persistence level

Parameters
ip‐address
network‐mask
Defaults
None.
Mode
Router command, SLB Virtual Server Configuration mode: Matrix>Router(config‐slb‐vserver)#
Usage
If no clients are specified with this command, all clients will be allowed to use a virtual server.
The "no" form of this command removes permission for a client to use the virtual server.
Example
This example shows how to allow a client at 100.12.22.42 255.255.255.0 to use the virtual server
named "virtual‐lsnat":
Matrix>Router(config)#ip slb vserver virtual-lsnat
Matrix>Router(config-slb-vserver)#client 100.12.22.42 255.255.255.0
persistence level
Use this command to set the type of binding used and the time limit to allow clients to remain
bound to an LSNAT virtual server.
Syntax
persistence level [tcp | ssl | sticky] timeperiod
no persistence level {tcp | ssl | sticky}
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Specifies a client's IP address.
(Optional) Specifies a client's network mask.
Enterasys Matrix DFE-Gold Series Configuration Guide 19-25