Show Multiauth Trap - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Multiple Authentication
terminated
max‐reached
Defaults
None.
Mode
Switch command, Read‐Write.
Examples
This example shows how to disable the multiauth system trap setting:
Matrix(rw)->clear multiauth trap system
This example shows how to disable all multiauth port trap settings:
Matrix(rw)->clear multiauth trap port ge.1.1 all

show multiauth trap

Use this command to display multiple authentication trap settings for the specified context.
Syntax
show multiauth trap {system | module | port portstring {all | success | failed |
terminated | max-reached}}
Parameters
port portstring
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display multiple authentication trap settings for port ge.1.1‐4:
Matrix(rw)->show multiauth trap port ge.1.1-4
Location
-------------
ge.1.1
ge.1.2
ge.1.3
ge.1.4
27-16 MultiAuth Configuration
Enables sending terminated traps for the specified port.
Enables sending max number users reached traps for the specified port.
Displays the configuration settings for multiauth port traps for the port
specified in portstring.
Trap configuration
Success Failed
---------- ----------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Terminated Max-Reached
---------- ----------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
show multiauth trap