Set Port Mdix - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Auto-Negotiation and Advertised Ability
auto
mdi
mdix
Defaults
If port‐string is not specified, the mode for all ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display MDI/MDIX mode for 1‐Gigabit Ethernet port 14 in module 3:
Matrix(rw)->show port negotiation ge.3.14
mdix configuration is auto on port fe.3.14

set port mdix

Use this command to set MDI/MDIX mode on one or more ports.
Syntax
set port mdix [port-string] {auto | mdi | mdix}
Parameters
port‐string
auto
mdi
mdix
Defaults
If port‐string is not specified, mode will be set for all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to force 1‐Gigabit Ethernet port 14 in module 3 to MDIX configuration:
Matrix(rw)->set port mdix ge.3.14 mdix
4-32 Port Configuration
Displays port(s) automatically determining MDI/MDIX.
Displays port(s) forced to MDI configuration.
Displays port(s) forced to MDIX configuration.
(Optional) Sets mode for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI"
on page 4‐2.
Sets port(s) to automatically determine MDI/MDIX.
Forces port(s) to MDI configuration.
Forces port(s) to MDIX configuration.
set port mdix