Clear Macauthentication Significant-Bits; Set Macauthentication Port - Enterasys Matrix DFE-Gold Series Configuration Manual

clear macauthentication significant-bits

Mode
Switch command, Read‐Write.
Examples
This example shows how to set the MAC authentication significant bits to 24:
Matrix(rw)->set macauthentication significant-bits 24
clear macauthentication significant-bits
Use this command to clear the MAC authentication significant bits setting.
Syntax
clear macauthentication significant-bits
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the MAC authentication significant bits setting:
Matrix(rw)->clear macauthentication significant-bits

set macauthentication port

Use this command to enable or disable one or more ports for MAC authentication.
Syntax
set macauthentication port {enable | disable} port-string
Parameters
enable | disable
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Enables or disables MAC authentication.
Specifies port(s) on which to enable or disable MAC authentication. For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-31
Configuring MAC Authentication