Inservice (Virtual Server); Client - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)

inservice (virtual server)

Use this command to enable a virtual LSNAT server.
Syntax
inservice
no inservice
Parameters
None.
Defaults
None.
Mode
Router command, SLB Virtual Server Configuration mode: Matrix>Router(config‐slb‐vserver)#
Usage
The "no" form of this command removes the virtual server from service.
Example
This example shows how to enable virtual server named "virtual‐http":
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#exit
Matrix>Router(config)#ip slb vserver virtual-http
Matrix>Router(config-slb-vserver)#serverfarm httpserver
Matrix>Router(config-slb-vserver)#virtual 10.1.4.5 tcp www
Matrix>Router(config-slb-vserver)#inservice

client

Use this command to allow a specific client to use a virtual server.
Syntax
client [ip-address network-mask]
no client [ip-address network-mask]
19-24 LSNAT Configuration
inservice (virtual server)