Clear Tacacs Server; Show Tacacs Session - Enterasys Matrix DFE-Gold Series Configuration Manual

clear tacacs server

clear tacacs server
Use this command to remove one or all configured TACACS+ servers, or to return the timeout
value to its default value for one or all configured TACACS+ servers.
Syntax
clear tacacs server {all | index} [timeout]
Parameters
all
index
timeout
Defaults
If timeout is not specified, the affected TACACS+ servers will be removed.
Mode
Switch command, Read‐Write.
Example
This example removes TACACS+ server 1.
Matrix(rw)->clear tacacs server 1

show tacacs session

Use this command to display the current TACACS+ client session settings.
Syntax
show tacacs session {authorization | accounting [state]}
Parameters
authorization
accounting
state
Defaults
If state is not specified, all session accounting configuration parameters are displayed (which at
this time includes only the enabled/disabled status).
Mode
Switch command, Read‐Only.
Examples
This example shows how to display client session authorization information:
Specifies that all configured TACACS+ servers should be affected.
Specifies one TACACS+ server to be affected.
(Optional) Return the timeout value to its default value of 10 seconds.
Display client session authorization settings.
Display client session accounting settings.
(Optional) Display the client session accounting state.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-67
Configuring TACACS+