Show Console Baud; Set Console Baud - Enterasys Matrix DFE-Gold Series Configuration Manual

show console baud

Parameters
port‐string
Defaults
If port‐string is not specified, properties for all console ports will be cleared.
Mode
Switch command, Read‐Only.
Example
This example shows how to clear properties for console port com.1.1:
Matrix(rw)->clear console com.1.1
show console baud
Use this command to display the baud rate for one or more console ports.
Syntax
show console baud [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, baud rate for all console ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the baud rate for console port com.1.1:
Matrix(rw)->show console baud com.1.1
Port
------------
com.1.1

set console baud

Use this command to set the baud rate for one or more console ports.
Syntax
set console baud rate [port-string]
(Optional) Clears properties for specific console port(s).
(Optional) Displays baud rate for specific console port(s).
Baud
--------
38400
Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-5