Commands; Example Of Vlan Propagation Via Gvrp - Enterasys Matrix DFE-Gold Series Configuration Manual

set vlan dynamicegress
Figure 7-1
Configuring a VLAN on an 802.1Q switch creates a static VLAN entry. The entry will always
remain registered and will not time out. However, dynamic entries will time‐out and their
registrations will be removed from the member list if the end station A is removed. This ensures
that, if switches are disconnected or if end stations are removed, the registered information
remains accurate.
The end result is that the port egress list of a port is updated with information about VLANs that
reside on that port, even if the actual station on the VLAN is several hops away.

Commands

For information about...
show gvrp
show garp timer
set gvrp
clear gvrp
set garp timer
clear garp timer

Example of VLAN Propagation via GVRP

R
D
Enterasys Matrix DFE-Gold Series Configuration Guide 7-23
Enabling/Disabling GVRP
Refer to page...
7-24
7-24
7-26
7-26
7-27
7-27