Show Igmp Grp-Full-Action; Set Igmp Grp-Full-Action - Enterasys Matrix DFE-Gold Series Configuration Manual

show igmp grp-full-action

Mode
Switch command, Read‐Write.
Example
This example shows how to disable IGMP querying on VLAN 104:
Matrix(rw)->set igmp query-disable 104
show igmp grp-full-action
Use this command to show what action to take with multicast frames when the multicast IGMP
group table is full
Syntax
show igmp grp-full-action
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the action taken for multicast frames when the IGMP group
table is full:
Matrix(rw)->show igmp grp-full-action
Group Table Full Action: Flood to Vlan

set igmp grp-full-action

Use this command to determine what action to take with multicast frames when the multicast
group table is full.
Syntax
set igmp grp-full-action action
Parameters
action
Defaults
Flood multicast frames to the Vlan
Specifies the action to take when the multicast Group Table is full. The
options are:
•
1-send multicast frames to Routers
•
2-flood multicast frames to the VLAN
Enterasys Matrix DFE-Gold Series Configuration Guide 9-7
Configuring IGMP