Clear Flowlimit Port Class; Set Flowlimit Shutdown - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Flow Setup Throttling (FST)
Defaults
If port‐string is not specified, settings will apply to all ports.
Mode
Switch command, Read‐Write.
Usage
Once a classification is assigned, these ports will be subject to the flow limit configured (with the
set flowlimit limit command as described in "set flowlimit limit" on page 24‐27) and the action
configured (with the set flowlimit action command as described in "set flowlimit action" on
page 24‐28).
Example
This example shows how to assign the user port classification type to Fast Ethernet ports 3‐5 in
module 2:
Matrix(rw)->set flowlimit port class userport fe.2.3-5

clear flowlimit port class

Use this command to remove flow limiting port classification properties.
Syntax
clear flowlimit port class [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, classifications will be removed from all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear port classifications from all Gigabit Ethernet ports:
Matrix(rw)->clear flowlimit port class ge.*.*

set flowlimit shutdown

Use this command to enable or disable the flow limit shut down function.
Syntax
set flowlimit shutdown {enable | disable}
24-32 Security Configuration
(Optional) Specifies port(s) on which to remove flow limiting
classification properties.
clear flowlimit port class