Show Spantree Adminpathcost; Set Spantree Adminpathcost - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Spanning Tree Port Parameters
• If sid is not specified, port cost will be displayed for all Spanning Trees.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the port cost for fe.2.5:
Matrix(rw)->show spantree portcost port fe.2.5
Port fe.2.5 has a Port Path Cost of 2000000 on SID 0

show spantree adminpathcost

Use this command to display the admin path cost for a port on one or more Spanning Trees.
Syntax
show spantree adminpathcost [port port-string] [sid sid]
Parameters
port port‐string
sid sid
Defaults
• If port‐string is not specified, admin path cost for all Spanning Tree ports will be displayed.
• If sid is not specified, admin path cost for Spanning Tree 0 will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the admin path cost for fe.3.4 on SID 1:
Matrix(rw)->show spantree adminpathcost port fe.3.4 sid 1
Port fe.3.4 has a Port Admin Path Cost of 0 on SID 1

set spantree adminpathcost

Use this command to set the administrative path cost on a port and one or more Spanning Trees.
Syntax
set spantree adminpathcost port-string cost [sid sid]
6-58 Spanning Tree Configuration
(Optional) Displays the admin path cost value for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
(Optional) Displays the admin path cost for a specific Spanning Tree
identifier. Valid values are 0 ‐ 4094. If not specified, SID 0 will be
assumed.
show spantree adminpathcost