Set Time; Show Summertime - Enterasys Matrix DFE-Gold Series Configuration Manual

set time

set time
Use this command to change the time of day on the system clock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
[mm/dd/yyyy]
[hh:mm:ss]
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the system clock to 7:50 a.m:
Matrix(rw)->set time 7:50:00

show summertime

Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display daylight savings time settings:
Matrix(rw)->show summertime
Summertime is disabled and set to ''
Start : SUN MAR 11 02:00:00 2007
Sets the time in:
• month, day, year and/or
• 24‐hour format
At least one set of time parameters must be entered.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-41
Setting Basic Device Properties