Clear Multiauth Mode; Show Multiauth - Enterasys Matrix DFE-Gold Series Configuration Manual

clear multiauth mode

Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable multiple authentication:
Matrix(rw)->set multiauth mode multi
clear multiauth mode
Use this command to clear the system authentication mode.
Syntax
clear multiauth mode
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the system authentication mode:
Matrix(rw)->clear multiauth mode

show multiauth

Use this command to display system‐configured multiauth values.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-3