Show Ip Address; Set Ip Address - Enterasys Matrix DFE-Gold Series Configuration Manual

show ip address

For information about...
set system contact
set width
set length
show logout
set logout
show physical alias
set physical alias
clear physical alias
show physical assetid
set physical assetid
clear physical assetid
show ip address
Use this command to display the system IP address and subnet mask.
Syntax
show ip address
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the system IP address and subnet mask:
Matrix(rw)->show ip address
Name
----------------
host

set ip address

Use this command to set the system IP address, subnet mask and default gateway.
Syntax
set ip address ip-address [mask ip-mask] [gateway ip-gateway]
Address
----------------
10.42.13.20
Enterasys Matrix DFE-Gold Series Configuration Guide 2-31
Setting Basic Device Properties
Refer to page...
2-51
2-51
2-52
2-52
2-53
2-53
2-54
2-55
2-55
2-56
2-56
Mask
----------------
255.255.0.0