Show License - Enterasys Matrix DFE-Gold Series Configuration Manual

show license

Parameters
advanced
redundancy
license‐key
slot
slot
Defaults
If not specified, the license will be bound to all modules.
Mode
Switch command, Read‐Write.
Example
This example shows how to use license key abcdefg123456789 to activate advanced routing
features:
Matrix(rw)->set license advanced abcdefg123456789
show license
When available and activated, use this command to display your license key.
Syntax
show license
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to display your license key information:
Matrix(rw)->show license
advanced abcdefg123456789
Activates advanced routing features.
Activates management module redundancy.
Specifies your unique 16‐digit hexadecimal advanced licensing key.
Note: When available, the licensing key will display at the top of the show
running-config command output.To see an example of this output, refer to
"show running-config" on page 16-8.
(Optional) Specifies a module to which the license will be bound.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-59
Activating Licensed Features