Enterasys Matrix DFE-Gold Series Configuration Manual page 135

exit | quit
Defaults
None.
Mode
Switch command, Read‐Only.
Usage
By default, device timeout occurs after 15 minutes of user inactivity, automatically closing your
CLI session. Use the set logout command as described in "set logout" on page 2‐53 to change this
default.
When operating in router mode, the exit command jumps to a lower configuration level. For
details on enabling router configuration modes, refer to "Enabling Router Configuration Modes"
on page 2‐103.
Example
This example shows how to exit a CLI session:
Matrix(rw)->exit
Pausing, Clearing and Closing the CLI
Enterasys Matrix DFE-Gold Series Configuration Guide 2-93