Clear Netflow Template - Enterasys Matrix DFE-Gold Series Configuration Manual

clear netflow template

clear netflow template
Use this command to reset the Version 9 template refresh rate and/or timeout values to their
default values.
Syntax
clear netflow template {[refresh-rate] [timeout]}
Parameters
refresh‐rate
timeout
Defaults
At least one of the refresh‐rate or timeout parameters must be specified, although both can be
specified on one command line.
Mode
Switch command, Read‐Write.
Example
This example shows how to return the Version 9 template packet refresh rate to 20 packets and the
timeout value to 30 minutes:
Matrix(rw)->set netflow template refresh-rate 50 timeout 30
Clear the template packet refresh rate to the default value of 20 packets.
Clear the template timeout to the default value of 30 minutes.
Enterasys Matrix DFE-Gold Series Configuration Guide 15-11
Configuring NetFlow