Clear Spantree Hello; Show Spantree Maxage - Enterasys Matrix DFE-Gold Series Configuration Manual

clear spantree hello

Example
This example shows how to globally set the Spanning Tree hello time to 10 seconds:
Matrix(rw)->set spantree hello 10
clear spantree hello
Use this command to reset the Spanning Tree hello time to the default value.
Syntax
clear spantree hello
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to globally reset the Spanning Tree hello time:
Matrix(rw)->clear spantree hello

show spantree maxage

Use this command to display the Spanning Tree maximum aging time.
Syntax
show spantree maxage
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the Spanning Tree maximum aging time:
Matrix(rw)->show spantree maxage
Bridge Max Age Time is set to 20 seconds
Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-25