Show Spantree Lpcapablepartner; Clear Spantree Lpcapablepartner - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Spanning Tree Loop Protect Features

show spantree lpcapablepartner

Use this command to the Loop Protect capability of a link partner for one or more ports.
Syntax
show spantree lpcapablepartner [port port-string]
Parameters
port‐string
Defaults
If no port‐string is specified, Loop Protect capability for link partners is displayed for all ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the Loop Protect partner capability for ge.1.1:
Matrix(rw)->show spantree lpcapablepartner port ge.1.1
Link partner of port ge.1.1

clear spantree lpcapablepartner

Use this command to reset the Loop Protect capability of port link partners to the default state of
false.
Syntax
clear spantree lpcapablepartner port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the Loop Protect partner capability for ge.1.1:
Matrix(rw)->clear spantree lpcapablepartner ge.1.1
6-70 Spanning Tree Configuration
(Optional) Specifies port(s) for which to display Loop Protect capability
for its link partner. For a detailed description of possible port‐string
values, refer to "Port String Syntax Used in the CLI" on page 4‐2.
is not LoopProtect-capable.
Specifies port(s) for which to clear their link partners' Loop Protect
capability (reset to false). For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 4‐2.
show spantree lpcapablepartner