No Ip Routing - Enterasys Matrix DFE-Gold Series Configuration Manual

Managing Router Configuration Files
interface vlan 2
iP Address 182.127.62.1 255.255.255.0
no shutdown
exit
router rip
network 182.127.0.0
exit
disable
exit

no ip routing

Use this command to disable IP routing on the device and remove the routing configuration.
Syntax
no ip routing
Parameters
None.
Defaults
None.
Mode
Router command, Global configuration: Matrix>Router(config)#
Usage
By default, IP routing is enabled when interfaces are configured for it as described in
"Configuring Routing Interface Settings" on page 16‐1.
Example
This example shows how to disable IP routing on the device:
Matrix>Router(config)#no ip routing
16-10 IP Configuration
no ip routing