Table of Contents
Advertisement
show config
B3(rw)->show file configs/mypolicy
1 :
2 :
3 : #policy
4 :
5 : set policy profile 1 name "Check GUEST" pvid-status enable pvid 4095 untagged-
vlans 1
6 :
7 : set policy profile 2 name "User LABORATORIES" pvid-status enable pvid 680 cos-
status enable cos 4 untagged-vlans 680
8 :
9 : set policy profile 3 name "Administrator" pvid-status enable pvid 4095
10 :
11 : set policy profile 4 name "Guest" pvid-status enable pvid 999 cos-status
enable cos 3 untagged-vlans 999
12 :
13 : set policy port ge.1.1 4
14 :
15 : set policy port ge.1.2 4
show config
Use this command to display the system configuration or write the configuration to a file.
Syntax
show config [all | facility] [outfile {configs/filename}]
Parameters
all
facility
outfile
configs/filename
Defaults
By default, show config will display all non‐default configuration information for all facilities.
Mode
Switch command, read‐only.
Usage
The separate facilities that can be displayed by this command are identified in the display of the
current configuration by a # preceding the facility name. For example, "#port" indicates the facility
name "port."
Examples
This example shows how to write the current configuration to a file named save_config2:
B3(rw)->show config all outfile configs/save_config2
3-44 Basic Configuration
(Optional) Displays default and non‐default configuration settings.
(Optional) Specifies the exact name of one facility for which to show
configuration. For example, enter "router" to show only router
configuration.
(Optional) Specifies that the current configuration will be written to a text
file in the configs/ directory.
Specifies a filename in the configs/ directory to display.
Advertisement
Table of Contents
