Show Logging Server; Show Logging All Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

show logging server

1 80.80.80.252
Defaults:
Syslog Console Logging enabled
Syslog File Logging disabled
Table 10‐1 provides an explanation of the command output.
Table 10-1 show logging all Output Details
Output...
Application
Current Severity Level
Defaults
IP Address
Facility
Severity
Description
Port
Status
show logging server
Use this command to display the Syslog configuration for a particular server.
Syntax
show logging server [index]
Parameters
index
local7 debugging(8)
local4 debugging(8)
What it displays...
A mnemonic abbreviation of the textual description for applications
being logged.
Severity level (1 - 8) at which the server is logging messages for the
listed application. For details on setting this value using the set
logging application command, refer to
page 10-9.
Default facility name, severity level and UDP port designation (as
described below.) For details on setting this value using the set
logging defaults command, refer to
page 10-6.
Syslog server's IP address. For details on setting this using the set
logging server command, refer to
Syslog facility that will be encoded in messages sent to this server.
Valid values are: local0 to local7.
Severity level at which the server is logging messages.
Text string description of this facility/server.
UDP port the client uses to send to the server.
Whether or not this Syslog configuration is currently enabled or
disabled.
(Optional) Displays Syslog information pertaining to a specific server
table entry. Valid values are 1‐8.
N-Series
"set logging
"set logging
"set logging
Enterasys Matrix DFE-Gold Series Configuration Guide 10-3
Configuring System Logging
514 enabled
514
application" on
default" on
server" on page 10-4.