Clear Tacacs Session - Enterasys Matrix DFE-Gold Series Configuration Manual

clear tacacs session

Mode
Switch command, Read‐Write.
Usage
When session accounting is enabled, the TACACS+ server will log accounting information, such as
start and stop times, IP address of the client, and so forth, for each authorized client session.
When the TACACS+ client is enabled on the Enterasys Matrix switch (with the set tacacs enable
command), the session authorization parameters configured with this command are sent by the
client to the TACACS+ server when a session is initiated on the Enterasys Matrix switch. The
parameter values must match a service and access level attribute‐value pairs configured on the
server for the session to be authorized. If the parameter values do not match, the session will not
be allowed.
The service name and attribute‐value pairs can be any character string, and are determined by
your TACACS+ server configuration.
Examples
This example configures the service requested by the TACACS+ client as the service name "basic."
Matrix(rw)->set tacacs session authorization service basic
This example maps the Matrix read‐write access privilege level to an attribute named "priv‐lvl"
with the value of 5 configured on the TACACS+ server.
Matrix(rw)->set tacacs session authorization read-write priv-lvl 5
This example enables TACACS+ session accounting.
Matrix(rw)->set tacacs session accounting enable
clear tacacs session
Use this command to return the TACACS+ session authorization settings to their default values.
Syntax
clear tacacs session authorization { [service] [read-only] [read-write] [super-
user] }
Parameters
authorization
service
read‐only
read‐write
super‐user
Clears the TACACS+ session authorization parameters.
Clears the TACACS+ session authorization service name to the default
value of "exec."
Clears the TACACS+ session authorization read‐only attribute‐value
pair to their default values of "priv‐lvl" and 0.
Clears the TACACS+ session authorization read‐write attribute‐value
pair to their default values of "priv‐lvl" and 1.
Clears the TACACS+ session authorization super‐user attribute‐value
pair to their default values of "priv‐lvl" and 15.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-69
Configuring TACACS+